端面齿万向联轴器供应商

荣基工业科技(江苏)有限公司「www.rokeecoupling.com」端面齿万向联轴器供应商,端面齿万向联轴器厂家,端面齿万向联轴器生产厂家,端面齿万向联轴器加工厂家,端面齿万向联轴器制造厂家,端面齿万向联轴器销售批发定制,价格实在,欢迎咨询.

鼓形齿式联轴器是一种特别设计的先进齿式联轴器，其外齿制成球面，球面的中心在齿轮的轴线上，齿侧的间隙比一般产品稍大，可以传递较大的扭矩和允许较大的角位移，性能优异且寿命更加长久。

The drum gear coupling is a specially designed advanced toothed coupling. Its outer teeth are made into a sphere, with the center of the sphere on the axis of the gear. The teeth clearance is slightly larger than the general products and can transfer a greater torque and allow greater angular displacement, enjoying excellent performance and longer life.

ROD鼓形齿联轴器结合了日本，德国等先进国家的联轴器标准技术，优化了很多细部尺寸链，采用了大压力角齿形设计，轴孔采用短轴设计，缩小了长径比，结构更加紧凑，转速性能优异。相近型号的螺栓采用标准统一化，零部件通用性好。与国家标准联轴器相比能够传递更大的扭矩，质量相对大幅度减轻，转动惯量小，符合欧洲防爆要求，各种综合性能大大超前。为了更好的传动性能，我们强烈推荐您选用。

ROD gear type coupling is one of the transmission products with core technology independently developed by Rokee and has established and reported corporate technical standards in the country. By combining with the standard coupling technology of advanced countries such as Japan and Germany, we optimized many detailed dimensions, and adopted the toothed design with a large pressure angle and short shaft design for the shaft hole, which reduces the length-diameter ratio, and has a more compact structure and excellent speed performance. The bolts of similar types are standardized and the parts are universal. Compared with the national standard gear couplings, our standard couplings can transfer more torque, with greatly reduced mass and small moment of inertia. Curved-tooth Gear Coupling meets the European explosion-proof requirements and the comprehensive performance is greatly advanced. We highly recommend you to choose our products for better transmission performance.

荣基工业科技(江苏)有限公司「www.rokeecoupling.com」端面齿万向联轴器供应商,端面齿万向联轴器厂家,端面齿万向联轴器生产厂家,端面齿万向联轴器加工厂家,端面齿万向联轴器制造厂家,端面齿万向联轴器销售批发定制,价格实在,欢迎咨询.

十字轴式万向联轴器采用十字轴承联接两端联接法兰，可以传递完全不在同一轴线的扭矩，对角向的补偿可达25︒以上，万向轴采用花键联接可以大距离地补偿轴向位移。万向联轴器承载能力高，传动效率优异，在现代工业领域被广泛采用。万向节联轴器利用其机构的特点，使两轴不在同一轴线，存在轴线夹角的情况下能实现所联接的两轴连续回转，并可靠地传递转矩和运动。

The cardan universal coupling uses cross bearings to connect the flanges at both ends, which can transmit torque that is not on the same axis. The diagonal compensation can reach more than 25°, and the spline connection can compensate for the axial displacement in a large distance. With high carrying capacity and excellent transmission efficiency, Cardan Shaft is widely used in modern industrial fields.